FAQ Search



Search Results


Q: Can I use existing coax cable for my installation?

A:  

Most equipment now-a-days is wireless, but all Nevco controls and scoreboards have the capability of operating over the same coax cable that older generations of scoreboards used. Be sure and test the cable prior to know that it can still be used.

Tags:  

installation

outdoor



Q: Can the equipment run on any voltage?

A:  

All Nevco Scoreboards, Message Centers and Video displays can run on any single phase voltage from 90 - 265VAC. Typically 120/208/240VAC are used. Confirm power requirements on the electrical instructions / prints for the equipment that you are...



Tags:  

installation

outdoor



Q: Do I need to paint the steel columns and lateral tubing (if any)?

A:  

Yes, a rust inhibative protective coating should be applied to the steel before hanging the cabinets. Make sure you buy the correct primer/paint for the surface you are painting and follow the manufacturer's instructions.

Tags:  

hanging-cabinets

installation

outdoor



Q: Do I need to get soil borings performed at the installation site?

A:  

Getting a geotechnical survey done at the installation site will eliminate risks of cost overruns during install. The standard installation prints assume class4 soil type, which is conservative in most areas. The footing depths shown on the...



Tags:  

foundations

installation

outdoor



Q: Does Nevco provide installation services?

A:  

Nevco does installations on certain large projects and can help you find an installer for even the smallest job. Contact our sales team for more information.

Tags:  

outdoor

installation



Q: How do I know my scoreboard width?

A:  

You can find your scoreboard width in these ways

  • the width (and model number) is listed on your proof,
  • with the scoreboard model number, you can use the lookup: foundations *...


Tags:  

under-8

foundations

8-to-18

30-to-36

20-to-28

outdoor

installation